Product Introduction
The rubber water stop is made using the characteristics of rubber such as high elasticity, good compressive deformation, high tear strength, and high tensile strength. It produces elastic deformation under various loads without tearing or breaking, thus serving the purpose of fastening seals, preventing seepage, and preventing leakage.
Scope of Application
Water stops can be widely used in projects such as subways, tunnels, mines, caverns, basements, dams, water storage tanks, sewage treatment plants, etc.
Construction Precautions
Before construction, check the water stop for any damage. During construction, follow the design requirements to ensure the correct position, lay it flat without curling, and secure it properly to avoid displacement during concrete pouring. Sufficient vibration must be applied during pouring to prevent poor bonding between the water stop and concrete, which could affect the water stop's effectiveness. The joints of the water stop must be firmly bonded, and if conditions permit, hot sulfur joints can be used.
Tag:
Rubber water stop belt
Contact Us
Classification
Related Products
The main performance indicators of the water-swelling water stop strip produced by our company have been tested and qualified by the National Building Materials Testing Center and the Beijing Building Materials Science Research and Testing Institute, and have reached the performance of similar foreign products. This product is a chemical building waterproof material made from more than a dozen materials, including high-grade water-absorbing materials and rubber, mainly aimed at solving the problem of water leakage in construction joints of underground concrete.
The water-swelling waterproof strip is widely used in deformation joints, construction joints, waterproof sealing of penetrating pipelines in civil engineering structures, joints of reinforced concrete in shield tunneling, waterproof sealing gaskets, interface materials for pipe jacking projects, sealing of interface for underground pipelines in open-cut box culverts, and waterproof sealing in hydraulic and hydropower engineering, as well as in waterway civil engineering.
The steel edge rubber water stop (also known as: steel edge water stop) is a rubber water stop with a non-uniform thickness structure in its cross-section. The steel edge water stop is divided into a strong area and a waterproof area. Installation holes are added to the steel plate of the water stop and connected to the rebar, making it difficult to displace after being fixed, ensuring that the stress on each part is uniform and reasonable. It has characteristics such as high strength, good elasticity, easy fixation (can be welded to the rebar for fixation), and strong bonding with concrete. However, it has a small elongation rate and poor resistance to bending deformation, making it unsuitable for areas with frequent changes in joint width.
Rubber water stop is made using the high elasticity and good compressive deformation of rubber, as well as its high tear strength and tensile strength, to produce elastic deformation under various loads without tearing or breaking, thus serving the purpose of securing seals, preventing seepage, and preventing leaks.
Power by 300.cn | Label | List of cities